Hardware for UPVC Tilt&turn window System
Details And Data Sheet
1.UPVC Windows with U type euro-slot
2.it is suitable for sash width FFB:400mm-1000mm and height FFH:500mm-1800mm.
3.the max loading ≦60kg.Suggested proportion of the width and height 1.5:1.
Hardware for UPVC Tilt&turn window system
| Series No. | Parts Name | |
| 1 | Top Hinge Parts | |
| 2 | T&T Hinge | |
| 3 | Corner | |
| 3A | Corner | |
| 4 |
keeper |
|
| 5 | Transimission Gear (BS:7.5mm) | |
| 6 |
Mishandling Device |
|
| 7 | keeper For Mishandling Device | |
| 8 |
Bottom Corner |
|
| 9 | T&T keeper (left); | |
| T&T keeper (right) | ||
| 10 | Bottom Hinge(left); | |
| Bottom Hinge(right) | ||
| 11 | Center Lock | |
| 12 | Diagonal Rod | |
| 13 | Handle | |
| 13A | Handle | |
There are a variety of handles to choose from: Fingerprint handle, standard three handle, square seat handle, handle with key
Configuration Description:
1.This configuration is suitable for plastic steel profiles of (20-12-9 Series, center distance: 7. 5mm), European standard u slot, with another 13 Series configuration
2.2. This configuration is suitable for sash slot width 400mm-1000mm, sash slot height 500mm ~ 1800mm
However, not all the window types with aspect ratio are suitable for fitting. It is recommended that the window type ratio (width/height) be maintained at (W)1:1.5(H) .
3.This configuration maximum load 60kg, load bearing level depends on the hinge, can refer to hinge series: fan weight (total weight of glass, fan profile, etc.) * 1.4 (safety factor) less than or equal to the maximum weight of the hinge
Hardware for UPVC Tilt&turn window system
Installation Process
Installation diagram of Hardware for aluminum turn&tilt window
Hardware installation sequence
Install according to Figure 1, Figure 2, Figure 3...One by one to install
Figure 1: First, screw the steering angle in the upper corner groove of the window fan to confirm that the eccentricity point direction is correct and cannot tighten the fixing plate
Figure 2: Use screw the lower connector in the lower corner groove of the window fan to confirm that the eccentric mirror point direction is correct, and can not lock the fixing plate
Figure 3: Position and mark the drive, cut the appropriate length and screw the drive in the window fan groove, confirm that the eccentric mirror point direction is correct and the mirror is fastened
Figure 4: Position the guide rod at the top of the window fan, then mark and cut the appropriate length and screw the guide rod in the window fan slot, locking the retaining plate
Figure 5: Connect the guide rod to the material pull rod
Figure 6: Install the lower chain at the lower window fan angle and lock with screws
Figure 7: Install the drive handle on the window fan and lock the well with screws
Figure 8: Install the overlock plate on the window frame and lock the well with screws
Schematic diagram of window dimension measurement
Note: 1. The hardware shall be measured from the surface of the u groove, the distance from the groove to the groove
2. To purchase hardware from the slot to the slot
Hardware for UPVC Tilt&turn window adjustment schematic diagram
Schematic diagram of internal opening and inverted hardware adjustment of plastic steel
Adjust the eccentric lock point by wrench: 1mm, can effectively adjust the tightness of the window frame fan, improve the water tightness, air tightness and air pressure resistance of the window.
The wrench adjusting screw ± 2mm, can effectively adjust the angle drop function of the window fan to match the left and right laps
Adjust the eccentric lock point ± 1mm, can effectively adjust the tightness of the window frame fan, improve the water tightness, air tightness and wind pressure resistance of the window adjusts the eccentric lock point ± 1mm, to effectively adjust the tightness of the window frame fan, improve the water tightness, air tightness and the resistance of wind pressure
The eccentric lock point ± 1mm, can effectively adjust the tightness of the window frame fan and improve the water tightness, air tightness and wind pressure resistance
The ± 2mm, effectively increases the left and right measures of doors and windows
Adjust the eccentric lock point ± 1mm, can effectively adjust the tightness of the window frame fan, improve the water tightness, air tightness and wind pressure resistance of the window
Inclined rod for around schematic diagram
Schematic diagram of inclined pull lever changing between left and right
Figure 1 Remove the cross screws
Figure 2 Cit with wire clamp
Figure 3 After leaving the card jam, rotate the hinge
Figure 4 The rod bar detached from the hinge
Figure 5 Uncrew the cross screw
Schematic installation of upper hinge opening
Schematic diagram of inclined pull lever changing between left and right
Figure 1 Remove the cross screws
Figure 2 Cit with wire clamp
Figure 3 After leaving the card jam, rotate the hinge
Figure 4 The rod bar detached from the hinge
Figure 5 Uncrew the cross screw
Installation diagram of lower hinge opening
Installation diagram of hand opening
Application
Refer to the atlas drive series to select the correct specification drive adjustment
Use a 4 # hexagon socket wrench
The sealing and pressing adjustment of the lock point of the transmission is 1mm
The main common problems and phenomena of the inner-opening and inner-inverted system Windows
Main common problems in opening the inverted system window
The 1, handle does not rotate in place ;The 2, window cannot be inverted inside;The 3, rotation is not flexible
The following figure is shown:
Measures:
When 1. is open, check the lock point of the guide lever is in the middle of the sign line
When 2. is open, check the steering corner lock in the middle of the sign line
When the 3. holds flat, check the lock point of the drive is in the middle of the sign line
When the 4. is open, check the lower lock point in the middle of the sign line
Measures:
When 1. is open, check the lock point of the guide lever is in the middle of the sign line
When 2. is open, check the steering corner lock in the middle of the sign line
When the 3. holds flat, check the lock point of the drive is in the middle of the sign line
When the 4. is open, check the lower lock point in the middle of the sign line
Not afraid to contrast in on details
Good Material
A variety of materials available to meet your different needs, strong and durable with a long time.
Quality Clearance
Use testing equipment to test products, layer by layer screening, control quality.
Support For Customization
Can be customized to drawings and samples, we provide you with reasonable solutions.
Power Merchant
Use testing equipment to test products,layer by layer,screening,control quality.
Are you still worrying about these problems?
Are you still running to the hardware store?
Worry about not being able to buy the specifications, too many to carry.
Are you still bargaining for accessories?You don’t know how to choose the size, the workmanship is bad, You don’t know
Hardware for UPVC Tilt&turn window system
Why Do You Choose Us
Product name:Hardware for UPVC Tilt&turn window
Product specifications: handle (standard handle, square seat handle)
Diagonal rod +T&T hinge :400-500#501-750# 751-1000#
UPVC Tilt&turn window parts: left;right
UPVC Hinge: Left,Right
Product features: load-bearing 60kg, left and right interchangeable, quick installation, smooth transmission, no noise.
Product material: Carbon Steel,zinc alloy
Reliable Product Quality
20 years experience
our prefessional is your success
The factory manufacturer supplys the product,
which can save intermediate links,and gives the maximum profit to the consumers.
Our Advantages
1. The raw materials of the castings are made of four-in-one zinc alloy, and the advanced material formula (±50 ℃) does not deform or break.
2. All stainless steel parts are made of 304 material, containing 7.5-8.5 nickel, which does not rust.
3. The plastic parts in the fitting system are made of high-strength wear-resistant nylon PA66 material, which will never be damaged.
4. The spraying part is sprayed with polyurethane material, the thickness is 45μm-100μm, and the dry adhesion is more than 10 grades, all exceeding national standards
5. The production equipment for zinc and aluminum die-casting machine is 120Ton, and the automatic punching machine is 180Ton,which ensure the hardness, strength and toughness of the casting. Inward opening, inverted, inner and outer casement windows open and close 450,000 times of opening and closing cycles, no distortion of parts, normal use
6. The surface treatment of the plated parts is a trivalent chromium electroplating process, the thickness of the plating layer is 45μm-100μm, and the salt spray test is 120 hours without pinholes, bulging and rust.
After nearly a year of repeated research and designing a mold opening test, Yuqiang Hardware has successfully improved the aluminum alloy casement window hinges, connectors, and inner opening and inverted hinge chains from the original aluminum alloy extrusion material to carbon steel. Stamping parts ensure that the load-bearing capacity of the accessories is increased. The original aluminum alloy hinges can load 70kg, and the carbon steel hinges can load up to 180kg without deformation or fracture.
It has fundamentally solved the load-bearing problem of super-standard large windows and triple-glazed windows. Now this product has been declared a national patent, leading other domestic brands.
Production Process
Buying Procedures
Q:Why choose YuQiang over any other companies?
A:We manufacture our products locally. Our customer service is exceptional and personalized for every customer. Every YuQiang product is armored and durable with a 12-month structural warranty. We use high quality materials sourced from the very best in China. Our design team works closely with customers for any custom orders.
Q:Which payment terms can we accept?
A:Normally we can work on T/T or L/C terms, sometimes DP term.
1). on T/T term, 30% advance payment is required and 70% balance shall be settled before shipment.
2). On L/C term, a 100% irrevocable L/C
Q:What logistics way for product delivery?
A:1).90% in shipment by sea, to all main continents such as South America, Middle East, Africa, Oceania and Europe, etc.
2). For neighborhood countries of China, including Russia, Mongolia, Uzbekistan etc., we can ship by road or railway.
3). For light parts in urgent need, we can deliver in international courier service, including DHL, TNT, UPS or FedEx.
Q:What are your warranty terms?
A:We provide a 12-month warranty on all our products, except failure caused by improper installation, operation or maintenance, accident, damage, misuse or non YuQiang modification and normal wear.
Q:What is your lead time?
A:We aim to provide customers with a fast lead time. We understand emergencies happen and priority production should be preferred in a faster turnaround. A stock order lead time is 3-5 working days, while custom orders within 1-2 weeks. Contact YuQiang products so we can provide an accurate lead time basing on situations.
